TX SOUND PACKS

Awaiting product image

Listen

Welcome to EdgeTX
Switch warning
Throttle warning
Telemetry lost
Telemetry recovered
Inactivity alarm

Traditional Chinese Voice Pack 2.12.0

$0.00

Standard Traditional Chinese voice pack for EdgeTX radios.

Category:
Tags: , ,

Description

This is a standard Traditional Chinese language voice pack for EdgeTX.

It contains all the standard audio prompts needed for your radio system, professionally recorded and optimized for clarity.

Reviews

There are no reviews yet.

Be the first to review “Traditional Chinese Voice Pack 2.12.0”

Your email address will not be published. Required fields are marked *

Pack Contents

Detected Language: EN (Folder: SOUNDS/tw)
This pack may be missing required EdgeTX sounds.
555 of 568 required sounds included
View missing standard sounds
  • autotun.wav – “Auto tune”
  • alvltrim.wav – “Auto level trim”
  • srvatrim.wav – “Servo auto trim”
  • open.wav – “open”
  • close.wav – “close”
  • locked.wav – “locked”
  • unlckd.wav – “unlocked”
  • canopy.wav – “canopy”
  • bind.wav – “bind”
  • vgext.wav – “wings extending”
  • vgextd.wav – “wings extended”
  • vgfold.wav – “wings folding”
  • vgfldd.wav – “wings folded”
Optional script sounds included
0 of 179 optional script sounds included

Some optional script sounds are not included.

View missing script sounds
  • BETAFLIGHT/p.wav – “P”
  • BETAFLIGHT/i.wav – “I”
  • BETAFLIGHT/d.wav – “D”
  • BETAFLIGHT/dsetpt.wav – “D setpoint”
  • INAV/acromd.wav – “acro mode”
  • INAV/active.wav – “active”
  • INAV/althld.wav – “altitude hold”
  • INAV/anglmd.wav – “angle mode”
  • INAV/batcrt.wav – “battery critical”
  • INAV/batlow.wav – “Low battery”
  • INAV/battry.wav – “battery”
  • INAV/cruzmd.wav – “cruise mode”
  • INAV/danger.wav – “danger”
  • INAV/engarm.wav – “engines armed”
  • INAV/engdrm.wav – “engines disarmed”
  • INAV/fsoff.wav – “failsafe off”
  • INAV/fson.wav – “failsafe on”
  • INAV/good.wav – “good”
  • INAV/gps.wav – “GPS”
  • INAV/hedhlda.wav – “heading hold active”
  • INAV/hedhld.wav – “heading hold”
  • INAV/hfact.wav – “headfree active”
  • INAV/hfoff.wav – “headfree off”
  • INAV/homrst.wav – “home reset”
  • INAV/hrznmd.wav – “horizon mode”
  • INAV/lost.wav – “lost”
  • INAV/manmd.wav – “manual mode”
  • INAV/normal.wav – “normal”
  • INAV/off.wav – “off”
  • INAV/on.wav – “on”
  • INAV/poshld.wav – “position hold”
  • INAV/ready.wav – “ready to fly”
  • INAV/rtl.wav – “return to launch”
  • INAV/toohgh.wav – “too high”
  • INAV/warnng.wav – “warning”
  • INAV/waypt.wav – “waypoint”
  • YAAPU/acro.wav – “acro flight mode”
  • YAAPU/acro_r.wav – “Acro mode”
  • YAAPU/alt.wav – “Altitude”
  • YAAPU/althold.wav – “Altitude hold flight mode”
  • YAAPU/armed.wav – “Motors armed”
  • YAAPU/auto.wav – “Auto flight mode”
  • YAAPU/auto_r.wav – “Auto mode”
  • YAAPU/autortl.wav – “Auto RTL flight mode”
  • YAAPU/autotune.wav – “Autotune enabled”
  • YAAPU/avoidadsb.wav – “Avoid A D S B flight mode”
  • YAAPU/bat5.wav – “Battery at 5 percent”
  • YAAPU/bat10.wav – “Battery at 10 percent”
  • YAAPU/bat15.wav – “Battery at 15 percent”
  • YAAPU/bat20.wav – “Battery at 20 percent”
  • YAAPU/bat25.wav – “Battery at 25 percent”
  • YAAPU/bat30.wav – “Battery at 30 percent”
  • YAAPU/bat40.wav – “Battery at 40 percent”
  • YAAPU/bat50.wav – “Battery at 50 percent”
  • YAAPU/bat60.wav – “Battery at 60 percent”
  • YAAPU/bat70.wav – “Battery at 70 percent”
  • YAAPU/bat80.wav – “Battery at 80 percent”
  • YAAPU/bat90.wav – “Battery at 90 percent”
  • YAAPU/batalert.wav – “Battery alert”
  • YAAPU/batalert1.wav – “Battery level 1 alert”
  • YAAPU/batalert2.wav – “Battery level 2 alert”
  • YAAPU/brake.wav – “Brake flight mode”
  • YAAPU/circle.wav – “Circle flight mode”
  • YAAPU/cruise.wav – “Cruise flight mode”
  • YAAPU/disarmed.wav – “Motors disarmed”
  • YAAPU/dist.wav – “Distance”
  • YAAPU/drift.wav – “Drift flight mode”
  • YAAPU/ekf.wav – “E K F failsafe”
  • YAAPU/failsafe.wav – “failsafe”
  • YAAPU/fence.wav – “fence enabled”
  • YAAPU/fencebreach.wav – “fence breach”
  • YAAPU/flip.wav – “Flip flight mode”
  • YAAPU/flowhold.wav – “flow position hold flight mode”
  • YAAPU/flybywirea.wav – “Fly by wire – A – flight mode”
  • YAAPU/flybywireb.wav – “Fly by wire – B – flight mode”
  • YAAPU/follow.wav – “follow flight mode”
  • YAAPU/follow_r.wav – “follow mode”
  • YAAPU/gpsfix.wav – “GPS 3D fix lock”
  • YAAPU/gpsnofix.wav – “No gps”
  • YAAPU/guided.wav – “Guided flight mode”
  • YAAPU/guided_r.wav – “Guided mode”
  • YAAPU/guidednogps.wav – “Guided no gps flight mode”
  • YAAPU/hold_r.wav – “Hold mode”
  • YAAPU/initializing.wav – “Initializing”
  • YAAPU/initializing_r.wav – “Initializing”
  • YAAPU/land.wav – “Land flight mode”
  • YAAPU/landing.wav – “Landing complete”
  • YAAPU/loiter.wav – “Loiter flight mode”
  • YAAPU/loiter_r.wav – “Loiter mode”
  • YAAPU/lowbat.wav – “Low battery”
  • YAAPU/manual.wav – “Manual flight mode”
  • YAAPU/manual_r.wav – “Manual mode”
  • YAAPU/maxalt.wav – “Max altitude alert”
  • YAAPU/maxdist.wav – “Max distance alert”
  • YAAPU/minalt.wav – “Low altitude alert”
  • YAAPU/poshold.wav – “Position hold flight mode”
  • YAAPU/qacro.wav – “Q acro flight mode”
  • YAAPU/qautotune.wav – “Q autotune flight mode”
  • YAAPU/qhover.wav – “Q hover flight mode”
  • YAAPU/qland.wav – “Q land flight mode”
  • YAAPU/qloiter.wav – “Q loiter flight mode”
  • YAAPU/qrtl.wav – “Q return to home flight mode”
  • YAAPU/qstabilize.wav – “Q stabilize flight mode”
  • YAAPU/rtl.wav – “Return to home”
  • YAAPU/rtl_r.wav – “Return to home mode”
  • YAAPU/simple_r.wav – “simple mode”
  • YAAPU/simpleoff.wav – “simple mode disabled”
  • YAAPU/simpleon.wav – “simple mode enabled”
  • YAAPU/smartrtl.wav – “Smart return to home flight mode”
  • YAAPU/smartrtl_r.wav – “Smart return to home mode”
  • YAAPU/sport.wav – “Sport flight mode”
  • YAAPU/ssimpleoff.wav – “super simple mode disabled”
  • YAAPU/ssimpleon.wav – “super simple mode enabled”
  • YAAPU/stabilize.wav – “Stabilize flight mode”
  • YAAPU/steering_r.wav – “Steering mode”
  • YAAPU/terrainko.wav – “no terrain data”
  • YAAPU/thermal.wav – “Thermal flight mode”
  • YAAPU/throw.wav – “Throw flight mode”
  • YAAPU/timealert.wav – “Timer alert”
  • YAAPU/training.wav – “Training flight mode”
  • YAAPU/turtle.wav – “turtle mode”
  • YAAPU/zigzag.wav – “Zigzag flight mode”
  • YAAPU/takeofffm.wav – “takeoff flight mode”
  • YAAPU/systemid.wav – “System I D flight mode”
  • YAAPU/autorotate.wav – “autorotate flight mode”
  • YAAPU/velocity.wav – “velocity flight mode”
  • YAAPU/yaapu.wav – “Yaa-pu telemetry ready”
  • YAAPU/altctl.wav – “Altitude control mode”
  • YAAPU/posctl.wav – “Position control mode”
  • YAAPU/ready.wav – “ready”
  • YAAPU/takeoff.wav – “Auto takeoff mode”
  • YAAPU/mission.wav – “Auto mission mode”
  • YAAPU/rtgs.wav – “link loss failsafe mode”
  • YAAPU/precland.wav – “Precision landing mode”
  • YAAPU/offboard.wav – “Offboard mode”
  • YAAPU/rattitude.wav – “rate attitude mode”
  • YAAPU/simple.wav – “simple mode”
  • YAAPU/264977348.wav – “PreArming: Need 3D Fix”
  • YAAPU/1834616480.wav – “Smart RTL Unavailable”
  • YAAPU/2386213680.wav – “EKF variance”
  • YAAPU/2310179660.wav – “GPS Glitch cleared”
  • YAAPU/4137200300.wav – “GPS Glitch”
  • YAAPU/2664106240.wav – “Parachute: Released”
  • YAAPU/656739232.wav – “Flight plan received”
  • YAAPU/3708582640.wav – “Mission complete”
  • YAAPU/1809087708.wav – “Geofence triggered”
  • YAAPU/116655276.wav – “Flight mode change failed”
  • YAAPU/1008001424.wav – “AutoTune: Success”
  • YAAPU/1396289024.wav – “AutoTune: Failed”
  • YAAPU/986165592.wav – “Transition done”
  • YAAPU/1249672288.wav – “Transition started”
  • YAAPU/4019153925.wav – “Transition done”
  • YAAPU/3417557720.wav – “Transition VTOL done”
  • YAAPU/1204090832.wav – “Land descend started”
  • YAAPU/2890289840.wav – “Land final started”
  • YAAPU/1883944664.wav – “Soaring: Outside max radius”
  • YAAPU/4175833240.wav – “Soaring: Disabled.”
  • YAAPU/2599859119.wav – “Soaring: not climbing”
  • YAAPU/636067590.wav – “Soaring: drifted too far”
  • YAAPU/2730864352.wav – “Soaring: Too high”
  • YAAPU/1698465616.wav – “Soaring: Too low”
  • YAAPU/981284144.wav – “Soaring: Thermal ended”
  • YAAPU/2913564252.wav – “Soaring: Drifted too far”
  • YAAPU/1746499976.wav – “Soaring: Exit via RC switch”
  • YAAPU/883458048.wav – “Soaring: Enabled.”
  • YAAPU/2139150204.wav – “Soaring: thermal weak”
  • YAAPU/1352994600.wav – “Soaring: reached upper altitude”
  • YAAPU/4026147344.wav – “Soaring: reached lower altitude”
  • YAAPU/4091124880.wav – “reached command:”
  • YAAPU/3311875476.wav – “reached waypoint:”
  • YAAPU/1997782032.wav – “Passed waypoint:”
  • YAAPU/554623408.wav – “Takeoff complete”
  • YAAPU/3025044912.wav – “Smart RTL deactivated”
  • YAAPU/3956583920.wav – “GPS home acquired”
  • YAAPU/1309405592.wav – “GPS home acquired”
  • INAV/autotn.wav – “Auto Tune”
  • INAV/autolm.wav – “Auto Level Trim”
  • INAV/soarng.wav – “Soaring”
  • INAV/beeper.wav – “Beeper”

Related products