TX SOUND PACKS

Awaiting product image

Listen

Welcome to EdgeTX
Switch warning
Throttle warning
Telemetry lost
Telemetry recovered
Inactivity alarm

Chinese Voice Pack 2.12.0

$0.00

Standard Chinese voice pack for EdgeTX radios.

Category:
Tags: , ,

Description

This is a standard Chinese language voice pack for EdgeTX.

It contains all the standard audio prompts needed for your radio system, professionally recorded and optimized for clarity.

Reviews

There are no reviews yet.

Be the first to review “Chinese Voice Pack 2.12.0”

Your email address will not be published. Required fields are marked *

Pack Contents

Detected Language: EN (Folder: SOUNDS/cn)
This pack may be missing required EdgeTX sounds.
336 of 568 required sounds included
View missing standard sounds
  • fsact.wav – “failsafe,active”
  • fsoff.wav – “failsafe,off”
  • osd1.wav – “OSD Profile 1”
  • osd2.wav – “OSD Profile 2”
  • osd3.wav – “OSD Profile 3”
  • rates1.wav – “rate profile 1”
  • rates2.wav – “rate profile 2”
  • rates3.wav – “rate profile 3”
  • rates4.wav – “rate profile 4”
  • rates5.wav – “rate profile 5”
  • rates6.wav – “rate profile 6”
  • scmdof.wav – “stick commands disabled”
  • scmdon.wav – “stick commands enabled”
  • telem.wav – “telemetry”
  • tlogon.wav – “telemetry logging on”
  • tlogof.wav – “telemetry logging off”
  • vtx.wav – “VTX”
  • vtxon.wav – “VTX,on”
  • vtxoff.wav – “VTX,off”
  • vtx25.wav – “VTX 25 milliwatts”
  • vtx50.wav – “VTX 50 milliwatts”
  • vtx100.wav – “VTX 100 milliwatts”
  • vtx200.wav – “VTX 200 milliwatts”
  • vtx300.wav – “VTX 300 milliwatts”
  • vtx400.wav – “VTX 400 milliwatts”
  • vtx500.wav – “VTX 500 milliwatts”
  • vtx600.wav – “VTX 600 milliwatts”
  • vtx700.wav – “VTX 700 milliwatts”
  • vtx800.wav – “VTX 800 milliwatts”
  • vtx900.wav – “VTX 900 milliwatts”
  • vtxpm.wav – “VTX Pit Mode”
  • vtxrm.wav – “VTX Race Mode”
  • vtx1w.wav – “VTX 1 watt”
  • vtx2w.wav – “VTX 2 watts”
  • vtx4w.wav – “VTX 4 watts”
  • clobat.wav – “critical low battery”
  • start.wav – “start”
  • stop.wav – “stop”
  • lghton.wav – “lights,on”
  • lghtof.wav – “lights,off”
  • buzoff.wav – “buzzer,off”
  • dyntxp.wav – “dynamic TX power”
  • maxtxp.wav – “maximum TX power”
  • thrhld.wav – “throttle hold”
  • thridl.wav – “throttle idle”
  • thrrel.wav – “throttle release”
  • negpon.wav – “negative pitch allowed”
  • negpof.wav – “negative pitch disallowed”
  • alnch.wav – “autolaunch started”
  • rscmon.wav – “rescue mode active”
  • rscmof.wav – “rescue mode off”
  • hdfmon.wav – “headfree mode active”
  • hdfmof.wav – “headfree mode off”
  • hdadj.wav – “heading adjust”
  • agmxon.wav – “FPV angle mix active”
  • agmxof.wav – “FPV angle mix off”
  • airmon.wav – “air mode on”
  • airmof.wav – “air mode off”
  • osdon.wav – “OSD,on”
  • osdoff.wav – “OSD,off”
  • rthstr.wav – “return to home started”
  • rthstp.wav – “return to home stopped”
  • wpnstr.wav – “waypoint navigation started”
  • wpnstp.wav – “waypoint navigation stopped”
  • crshon.wav – “course hold active”
  • crshof.wav – “course hold off”
  • poshon.wav – “position hold active”
  • poshof.wav – “position hold off”
  • althon.wav – “altitude hold active”
  • althof.wav – “altitude hold off”
  • loiter.wav – “loiter”
  • sftyon.wav – “safety,on”
  • sftyof.wav – “safety,off”
  • safeon.wav – “SAFE,on”
  • safeof.wav – “SAFE,off”
  • fepact.wav – “flight envelope protection active”
  • fepoff.wav – “flight envelope protection off”
  • timrs1.wav – “timer 1 reset”
  • timrs2.wav – “timer 2 reset”
  • timrs3.wav – “timer 3 reset”
  • expo1.wav – “expo 1”
  • expo2.wav – “expo 2”
  • expo3.wav – “expo 3”
  • active.wav – “active”
  • deact.wav – “deactivated”
  • enabl.wav – “enabled”
  • disabl.wav – “disabled”
  • good.wav – “good”
  • bad.wav – “bad”
  • normal.wav – “normal”
  • warnng.wav – “warning”
  • danger.wav – “danger”
  • ready.wav – “ready to fly”
  • homrst.wav – “home reset”
  • gps.wav – “GPS”
  • gpson.wav – “GPS,on”
  • gpsoff.wav – “GPS,off”
  • vtxfr1.wav – “VTX Frequency R1”
  • vtxfr2.wav – “VTX Frequency R2”
  • vtxfr3.wav – “VTX Frequency R3”
  • vtxfr4.wav – “VTX Frequency R4”
  • vtxfr5.wav – “VTX Frequency R5”
  • vtxfr6.wav – “VTX Frequency R6”
  • vtxfr7.wav – “VTX Frequency R7”
  • vtxfr8.wav – “VTX Frequency R8”
  • vtxmax.wav – “VTX Maximum Power”
  • blkers.wav – “blackbox erase”
  • actnmd.wav – “acro trainer mode”
  • cwifi.wav – “Camera wifi button”
  • cpower.wav – “Camera power button”
  • cmode.wav – “Camera change mode”
  • cstart.wav – “Camera start”
  • cstop.wav – “Camera stop”
  • recsrt.wav – “Recording start”
  • recstp.wav – “Recording stop”
  • strtrc.wav – “Start recording”
  • stoprc.wav – “Stop recording”
  • SYSTEM/dbm0.wav – “DBM”
  • SYSTEM/dbm1.wav – “DBM”
  • SYSTEM/km0.wav – “kilometer”
  • SYSTEM/km1.wav – “kilometers”
  • revthr.wav – “Reverse Thrust”
  • revon.wav – “Reverse Thrust On”
  • revoff.wav – “Reverse Thrust Off”
  • revid.wav – “Reverse Thrust Idle”
  • revfwd.wav – “Forward Thrust”
  • difloc.wav – “diffs locked”
  • difulc.wav – “diffs unlocked”
  • engsrt.wav – “engine start”
  • engstp.wav – “engine stop”
  • engon.wav – “engine on”
  • turnon.wav – “Turn signals on”
  • turnof.wav – “Turn signals off”
  • highgr.wav – “High gear”
  • lowgr.wav – “Low gear”
  • digmod.wav – “Dig mode”
  • 2wd.wav – “Two wheel drive”
  • 4wd.wav – “Four wheel drive”
  • wchin.wav – “Winch in”
  • wchout.wav – “Winch out”
  • str-f.wav – “Front Steer”
  • str-r.wav – “Rear Steer”
  • str-4w.wav – “Four Wheel Steer”
  • str-mr.wav – “Mirror Steer”
  • str-cr.wav – “Crab Steer”
  • motarm.wav – “Motor armed”
  • power.wav – “Power”
  • speed.wav – “Speed”
  • therml.wav – “Thermal”
  • fwd.wav – “Front wheel drive”
  • rwd.wav – “Rear wheel drive”
  • awd.wav – “All wheel drive”
  • thren.wav – “Throttle enabled”
  • thrdis.wav – “Throttle disabled”
  • wchen.wav – “Winch enabled”
  • wchdis.wav – “Winch disabled”
  • drifon.wav – “Drift mode on”
  • drifof.wav – “Drift mode off”
  • gyroon.wav – “Gyro enabled”
  • gyroof.wav – “Gyro disabled”
  • launch.wav – “Launch control active”
  • wetmde.wav – “Wet mode enabled”
  • maxgyr.wav – “Max gyro”
  • maxast.wav – “Max assistance”
  • overht.wav – “Overheating”
  • mothot.wav – “Motor overheating”
  • drifen.wav – “Drift Mode Enabled”
  • drifdb.wav – “Drift Mode Disabled”
  • screns.wav – “Screenshot”
  • cell.wav – “Cell”
  • txbatl.wav – “Transmitter Battery Low”
  • left.wav – “Left”
  • right.wav – “Right”
  • shift.wav – “Shift”
  • sbcton.wav – “Stability Control On”
  • sbctof.wav – “Stability Control Off”
  • sbcten.wav – “Stability Control Enabled”
  • sbctdb.wav – “Stability Control Disabled”
  • thmwrn.wav – “Thermal Warning”
  • srvovl.wav – “Servo Overload”
  • becovl.wav – “Beck Overload”
  • sbct.wav – “Stability Control”
  • sbctst.wav – “Stability Control – Standard”
  • gyro.wav – “Gyro”
  • low.wav – “Low”
  • medium.wav – “Medium”
  • high.wav – “High”
  • stanrd.wav – “Standard”
  • bashmd.wav – “Bash Mode”
  • racemd.wav – “Race Mode”
  • chilmd.wav – “Chill Mode”
  • trnmd.wav – “Trainer Mode”
  • spdmd.wav – “Speed Mode”
  • citymd.wav – “City Mode”
  • crusmd.wav – “Cruise Mode”
  • flapmd.wav – “Flaps Middle”
  • flapfl.wav – “Flaps Full”
  • moton.wav – “Motor On”
  • motoff.wav – “Motor Off”
  • motidl.wav – “Motor Idle”
  • autor.wav – “Autorotation”
  • reson.wav – “Rescue On”
  • htemp.wav – “High Temperature”
  • hvibr.wav – “High Vibration”
  • glwon.wav – “Glow On”
  • glwoff.wav – “Glow Off”
  • glwact.wav – “Glow Activated”
  • glwdea.wav – “Glow Deactivated”
  • trkmd.wav – “Track Mode”
  • dbrk.wav – “Drag brake”
  • dbrkon.wav – “Drag brake on”
  • dbrkof.wav – “Drag brake off”
  • dbrklw.wav – “Drag brake Low”
  • dbrkmd.wav – “Drag brake Medium”
  • dbrkhi.wav – “Drag brake High”
  • snapfon.wav – “Snapflap On”
  • snapfof.wav – “Snapflap Off”
  • snapflo.wav – “Snapflap Low”
  • snapfhi.wav – “Snapflap High”
  • autotun.wav – “Auto tune”
  • alvltrim.wav – “Auto level trim”
  • srvatrim.wav – “Servo auto trim”
  • open.wav – “open”
  • close.wav – “close”
  • locked.wav – “locked”
  • unlckd.wav – “unlocked”
  • canopy.wav – “canopy”
  • bind.wav – “bind”
  • vgext.wav – “wings extending”
  • vgextd.wav – “wings extended”
  • vgfold.wav – “wings folding”
  • vgfldd.wav – “wings folded”
Optional script sounds included
0 of 179 optional script sounds included

Some optional script sounds are not included.

View missing script sounds
  • BETAFLIGHT/p.wav – “P”
  • BETAFLIGHT/i.wav – “I”
  • BETAFLIGHT/d.wav – “D”
  • BETAFLIGHT/dsetpt.wav – “D setpoint”
  • INAV/acromd.wav – “acro mode”
  • INAV/active.wav – “active”
  • INAV/althld.wav – “altitude hold”
  • INAV/anglmd.wav – “angle mode”
  • INAV/batcrt.wav – “battery critical”
  • INAV/batlow.wav – “Low battery”
  • INAV/battry.wav – “battery”
  • INAV/cruzmd.wav – “cruise mode”
  • INAV/danger.wav – “danger”
  • INAV/engarm.wav – “engines armed”
  • INAV/engdrm.wav – “engines disarmed”
  • INAV/fsoff.wav – “failsafe off”
  • INAV/fson.wav – “failsafe on”
  • INAV/good.wav – “good”
  • INAV/gps.wav – “GPS”
  • INAV/hedhlda.wav – “heading hold active”
  • INAV/hedhld.wav – “heading hold”
  • INAV/hfact.wav – “headfree active”
  • INAV/hfoff.wav – “headfree off”
  • INAV/homrst.wav – “home reset”
  • INAV/hrznmd.wav – “horizon mode”
  • INAV/lost.wav – “lost”
  • INAV/manmd.wav – “manual mode”
  • INAV/normal.wav – “normal”
  • INAV/off.wav – “off”
  • INAV/on.wav – “on”
  • INAV/poshld.wav – “position hold”
  • INAV/ready.wav – “ready to fly”
  • INAV/rtl.wav – “return to launch”
  • INAV/toohgh.wav – “too high”
  • INAV/warnng.wav – “warning”
  • INAV/waypt.wav – “waypoint”
  • YAAPU/acro.wav – “acro flight mode”
  • YAAPU/acro_r.wav – “Acro mode”
  • YAAPU/alt.wav – “Altitude”
  • YAAPU/althold.wav – “Altitude hold flight mode”
  • YAAPU/armed.wav – “Motors armed”
  • YAAPU/auto.wav – “Auto flight mode”
  • YAAPU/auto_r.wav – “Auto mode”
  • YAAPU/autortl.wav – “Auto RTL flight mode”
  • YAAPU/autotune.wav – “Autotune enabled”
  • YAAPU/avoidadsb.wav – “Avoid A D S B flight mode”
  • YAAPU/bat5.wav – “Battery at 5 percent”
  • YAAPU/bat10.wav – “Battery at 10 percent”
  • YAAPU/bat15.wav – “Battery at 15 percent”
  • YAAPU/bat20.wav – “Battery at 20 percent”
  • YAAPU/bat25.wav – “Battery at 25 percent”
  • YAAPU/bat30.wav – “Battery at 30 percent”
  • YAAPU/bat40.wav – “Battery at 40 percent”
  • YAAPU/bat50.wav – “Battery at 50 percent”
  • YAAPU/bat60.wav – “Battery at 60 percent”
  • YAAPU/bat70.wav – “Battery at 70 percent”
  • YAAPU/bat80.wav – “Battery at 80 percent”
  • YAAPU/bat90.wav – “Battery at 90 percent”
  • YAAPU/batalert.wav – “Battery alert”
  • YAAPU/batalert1.wav – “Battery level 1 alert”
  • YAAPU/batalert2.wav – “Battery level 2 alert”
  • YAAPU/brake.wav – “Brake flight mode”
  • YAAPU/circle.wav – “Circle flight mode”
  • YAAPU/cruise.wav – “Cruise flight mode”
  • YAAPU/disarmed.wav – “Motors disarmed”
  • YAAPU/dist.wav – “Distance”
  • YAAPU/drift.wav – “Drift flight mode”
  • YAAPU/ekf.wav – “E K F failsafe”
  • YAAPU/failsafe.wav – “failsafe”
  • YAAPU/fence.wav – “fence enabled”
  • YAAPU/fencebreach.wav – “fence breach”
  • YAAPU/flip.wav – “Flip flight mode”
  • YAAPU/flowhold.wav – “flow position hold flight mode”
  • YAAPU/flybywirea.wav – “Fly by wire – A – flight mode”
  • YAAPU/flybywireb.wav – “Fly by wire – B – flight mode”
  • YAAPU/follow.wav – “follow flight mode”
  • YAAPU/follow_r.wav – “follow mode”
  • YAAPU/gpsfix.wav – “GPS 3D fix lock”
  • YAAPU/gpsnofix.wav – “No gps”
  • YAAPU/guided.wav – “Guided flight mode”
  • YAAPU/guided_r.wav – “Guided mode”
  • YAAPU/guidednogps.wav – “Guided no gps flight mode”
  • YAAPU/hold_r.wav – “Hold mode”
  • YAAPU/initializing.wav – “Initializing”
  • YAAPU/initializing_r.wav – “Initializing”
  • YAAPU/land.wav – “Land flight mode”
  • YAAPU/landing.wav – “Landing complete”
  • YAAPU/loiter.wav – “Loiter flight mode”
  • YAAPU/loiter_r.wav – “Loiter mode”
  • YAAPU/lowbat.wav – “Low battery”
  • YAAPU/manual.wav – “Manual flight mode”
  • YAAPU/manual_r.wav – “Manual mode”
  • YAAPU/maxalt.wav – “Max altitude alert”
  • YAAPU/maxdist.wav – “Max distance alert”
  • YAAPU/minalt.wav – “Low altitude alert”
  • YAAPU/poshold.wav – “Position hold flight mode”
  • YAAPU/qacro.wav – “Q acro flight mode”
  • YAAPU/qautotune.wav – “Q autotune flight mode”
  • YAAPU/qhover.wav – “Q hover flight mode”
  • YAAPU/qland.wav – “Q land flight mode”
  • YAAPU/qloiter.wav – “Q loiter flight mode”
  • YAAPU/qrtl.wav – “Q return to home flight mode”
  • YAAPU/qstabilize.wav – “Q stabilize flight mode”
  • YAAPU/rtl.wav – “Return to home”
  • YAAPU/rtl_r.wav – “Return to home mode”
  • YAAPU/simple_r.wav – “simple mode”
  • YAAPU/simpleoff.wav – “simple mode disabled”
  • YAAPU/simpleon.wav – “simple mode enabled”
  • YAAPU/smartrtl.wav – “Smart return to home flight mode”
  • YAAPU/smartrtl_r.wav – “Smart return to home mode”
  • YAAPU/sport.wav – “Sport flight mode”
  • YAAPU/ssimpleoff.wav – “super simple mode disabled”
  • YAAPU/ssimpleon.wav – “super simple mode enabled”
  • YAAPU/stabilize.wav – “Stabilize flight mode”
  • YAAPU/steering_r.wav – “Steering mode”
  • YAAPU/terrainko.wav – “no terrain data”
  • YAAPU/thermal.wav – “Thermal flight mode”
  • YAAPU/throw.wav – “Throw flight mode”
  • YAAPU/timealert.wav – “Timer alert”
  • YAAPU/training.wav – “Training flight mode”
  • YAAPU/turtle.wav – “turtle mode”
  • YAAPU/zigzag.wav – “Zigzag flight mode”
  • YAAPU/takeofffm.wav – “takeoff flight mode”
  • YAAPU/systemid.wav – “System I D flight mode”
  • YAAPU/autorotate.wav – “autorotate flight mode”
  • YAAPU/velocity.wav – “velocity flight mode”
  • YAAPU/yaapu.wav – “Yaa-pu telemetry ready”
  • YAAPU/altctl.wav – “Altitude control mode”
  • YAAPU/posctl.wav – “Position control mode”
  • YAAPU/ready.wav – “ready”
  • YAAPU/takeoff.wav – “Auto takeoff mode”
  • YAAPU/mission.wav – “Auto mission mode”
  • YAAPU/rtgs.wav – “link loss failsafe mode”
  • YAAPU/precland.wav – “Precision landing mode”
  • YAAPU/offboard.wav – “Offboard mode”
  • YAAPU/rattitude.wav – “rate attitude mode”
  • YAAPU/simple.wav – “simple mode”
  • YAAPU/264977348.wav – “PreArming: Need 3D Fix”
  • YAAPU/1834616480.wav – “Smart RTL Unavailable”
  • YAAPU/2386213680.wav – “EKF variance”
  • YAAPU/2310179660.wav – “GPS Glitch cleared”
  • YAAPU/4137200300.wav – “GPS Glitch”
  • YAAPU/2664106240.wav – “Parachute: Released”
  • YAAPU/656739232.wav – “Flight plan received”
  • YAAPU/3708582640.wav – “Mission complete”
  • YAAPU/1809087708.wav – “Geofence triggered”
  • YAAPU/116655276.wav – “Flight mode change failed”
  • YAAPU/1008001424.wav – “AutoTune: Success”
  • YAAPU/1396289024.wav – “AutoTune: Failed”
  • YAAPU/986165592.wav – “Transition done”
  • YAAPU/1249672288.wav – “Transition started”
  • YAAPU/4019153925.wav – “Transition done”
  • YAAPU/3417557720.wav – “Transition VTOL done”
  • YAAPU/1204090832.wav – “Land descend started”
  • YAAPU/2890289840.wav – “Land final started”
  • YAAPU/1883944664.wav – “Soaring: Outside max radius”
  • YAAPU/4175833240.wav – “Soaring: Disabled.”
  • YAAPU/2599859119.wav – “Soaring: not climbing”
  • YAAPU/636067590.wav – “Soaring: drifted too far”
  • YAAPU/2730864352.wav – “Soaring: Too high”
  • YAAPU/1698465616.wav – “Soaring: Too low”
  • YAAPU/981284144.wav – “Soaring: Thermal ended”
  • YAAPU/2913564252.wav – “Soaring: Drifted too far”
  • YAAPU/1746499976.wav – “Soaring: Exit via RC switch”
  • YAAPU/883458048.wav – “Soaring: Enabled.”
  • YAAPU/2139150204.wav – “Soaring: thermal weak”
  • YAAPU/1352994600.wav – “Soaring: reached upper altitude”
  • YAAPU/4026147344.wav – “Soaring: reached lower altitude”
  • YAAPU/4091124880.wav – “reached command:”
  • YAAPU/3311875476.wav – “reached waypoint:”
  • YAAPU/1997782032.wav – “Passed waypoint:”
  • YAAPU/554623408.wav – “Takeoff complete”
  • YAAPU/3025044912.wav – “Smart RTL deactivated”
  • YAAPU/3956583920.wav – “GPS home acquired”
  • YAAPU/1309405592.wav – “GPS home acquired”
  • INAV/autotn.wav – “Auto Tune”
  • INAV/autolm.wav – “Auto Level Trim”
  • INAV/soarng.wav – “Soaring”
  • INAV/beeper.wav – “Beeper”
Additional/Unknown Files
1 additional audio files found in ZIP
View extra files
  • SOUNDS/cn/fm-9.wav

Related products