TX SOUND PACKS

Awaiting product image

Listen

Welcome to EdgeTX
Switch warning
Throttle warning
Telemetry lost
Telemetry recovered
Inactivity alarm

Joshua Bardwell – English (US) Voice Pack 2.12.0

$0.00

Standard English (US) voice pack for EdgeTX radios.

Category:
Tags:

Description

This is a standard English (US) language voice pack for EdgeTX.

It contains all the standard audio prompts needed for your radio system, professionally recorded and optimized for clarity.

Note: This pack specifically features the voice of Joshua Bardwell.

Reviews

There are no reviews yet.

Be the first to review “Joshua Bardwell – English (US) Voice Pack 2.12.0”

Your email address will not be published. Required fields are marked *

Pack Contents

Detected Language: EN (Folder: SOUNDS/en)
This pack may be missing required EdgeTX sounds.
261 of 568 required sounds included
View missing standard sounds
  • SYSTEM/celsius0.wav – “degree celsius”
  • SYSTEM/celsius1.wav – “degrees celsius”
  • SYSTEM/trainco.wav – “Trainer connected”
  • tohigh.wav – “too high”
  • tolow.wav – “too low”
  • crowon.wav – “crow,on”
  • crowof.wav – “crow,off”
  • siglow.wav – “RF signal low”
  • sigcrt.wav – “RF signal critical”
  • spdmod.wav – “high speed mode active”
  • thmmod.wav – “thermal mode on”
  • lnding.wav – “landing mode on”
  • vrion.wav – “vario,on”
  • vrioff.wav – “vario,off”
  • fm-acr.wav – “flight mode acro”
  • ratlow.wav – “low rate”
  • ratmed.wav – “medium rate”
  • rathi.wav – “high rate”
  • takeof.wav – “take off”
  • sport.wav – “sport”
  • pattrn.wav – “pattern”
  • 3d.wav – “3D”
  • landin.wav – “landing”
  • idleu1.wav – “idle up 1”
  • idleu2.wav – “idle up 2”
  • normod.wav – “normal mode”
  • bank-0.wav – “bank 0”
  • bank-1.wav – “bank 1”
  • bank-2.wav – “bank 2”
  • bank-3.wav – “bank 3”
  • headlo.wav – “heading lock”
  • ratmod.wav – “rate mode”
  • 3d-mod.wav – “3D Mode”
  • stabmo.wav – “stabilize mode”
  • buzact.wav – “buzzer active”
  • crfact.wav – “crash-flip active”
  • blkact.wav – “blackbox active”
  • preact.wav – “pre-arm active”
  • stbmod.wav – “stable mode”
  • brakon.wav – “brakes,on”
  • brakof.wav – “brakes,off”
  • btfon.wav – “butterfly,on”
  • btfoff.wav – “butterfly,off”
  • flp1.wav – “flaps one”
  • flp2.wav – “flaps two”
  • flp3.wav – “flaps three”
  • flp4.wav – “flaps four”
  • flp5.wav – “flaps five”
  • wngswp.wav – “wingsweep”
  • whlbro.wav – “wheelbrakes,on”
  • whlbrf.wav – “wheelbrakes,off”
  • manmod.wav – “manual mode”
  • acrmod.wav – “acro mode”
  • angmod.wav – “angle mode”
  • hznmod.wav – “horizon mode”
  • lncmod.wav – “launch mode”
  • pitmod.wav – “pit mode”
  • navcrs.wav – “navigation cruise”
  • navcsh.wav – “navigation course hold”
  • navalh.wav – “navigation altitude hold”
  • navpos.wav – “navigation position hold”
  • navrth.wav – “navigation return to home”
  • navwp.wav – “navigation waypoint”
  • cruise.wav – “cruise”
  • crshld.wav – “course hold”
  • althld.wav – “altitude hold”
  • rth.wav – “return to home”
  • waypnt.wav – “waypoint”
  • manual.wav – “manual”
  • auto.wav – “auto”
  • osd.wav – “OSD”
  • osdprf.wav – “OSD profile”
  • sxrahd.wav – “attitude hold mode”
  • sxrman.wav – “manual mode”
  • sxrsmd.wav – “stabilizer mode”
  • sxrsof.wav – “stabilizer,off”
  • sxrstb.wav – “stabilizer,on”
  • sxrwr.wav – “wind rejection mode”
  • turton.wav – “turtle mode,on”
  • turtof.wav – “turtle mode,off”
  • flip.wav – “flip”
  • auro.wav – “autorotation”
  • fsact.wav – “failsafe,active”
  • fsoff.wav – “failsafe,off”
  • osd1.wav – “OSD Profile 1”
  • osd2.wav – “OSD Profile 2”
  • osd3.wav – “OSD Profile 3”
  • rates1.wav – “rate profile 1”
  • rates2.wav – “rate profile 2”
  • rates3.wav – “rate profile 3”
  • rates4.wav – “rate profile 4”
  • rates5.wav – “rate profile 5”
  • rates6.wav – “rate profile 6”
  • scmdof.wav – “stick commands disabled”
  • scmdon.wav – “stick commands enabled”
  • telem.wav – “telemetry”
  • tlogon.wav – “telemetry logging on”
  • tlogof.wav – “telemetry logging off”
  • vtx.wav – “VTX”
  • vtxon.wav – “VTX,on”
  • vtxoff.wav – “VTX,off”
  • vtx25.wav – “VTX 25 milliwatts”
  • vtx50.wav – “VTX 50 milliwatts”
  • vtx100.wav – “VTX 100 milliwatts”
  • vtx200.wav – “VTX 200 milliwatts”
  • vtx300.wav – “VTX 300 milliwatts”
  • vtx400.wav – “VTX 400 milliwatts”
  • vtx500.wav – “VTX 500 milliwatts”
  • vtx600.wav – “VTX 600 milliwatts”
  • vtx700.wav – “VTX 700 milliwatts”
  • vtx800.wav – “VTX 800 milliwatts”
  • vtx900.wav – “VTX 900 milliwatts”
  • vtxpm.wav – “VTX Pit Mode”
  • vtxrm.wav – “VTX Race Mode”
  • vtx1w.wav – “VTX 1 watt”
  • vtx2w.wav – “VTX 2 watts”
  • vtx4w.wav – “VTX 4 watts”
  • clobat.wav – “critical low battery”
  • lghton.wav – “lights,on”
  • lghtof.wav – “lights,off”
  • buzoff.wav – “buzzer,off”
  • dyntxp.wav – “dynamic TX power”
  • maxtxp.wav – “maximum TX power”
  • thrhld.wav – “throttle hold”
  • thridl.wav – “throttle idle”
  • thrrel.wav – “throttle release”
  • negpon.wav – “negative pitch allowed”
  • negpof.wav – “negative pitch disallowed”
  • alnch.wav – “autolaunch started”
  • rscmon.wav – “rescue mode active”
  • rscmof.wav – “rescue mode off”
  • hdfmon.wav – “headfree mode active”
  • hdfmof.wav – “headfree mode off”
  • hdadj.wav – “heading adjust”
  • agmxon.wav – “FPV angle mix active”
  • agmxof.wav – “FPV angle mix off”
  • airmon.wav – “air mode on”
  • airmof.wav – “air mode off”
  • osdon.wav – “OSD,on”
  • osdoff.wav – “OSD,off”
  • rthstr.wav – “return to home started”
  • rthstp.wav – “return to home stopped”
  • wpnstr.wav – “waypoint navigation started”
  • wpnstp.wav – “waypoint navigation stopped”
  • crshon.wav – “course hold active”
  • crshof.wav – “course hold off”
  • poshon.wav – “position hold active”
  • poshof.wav – “position hold off”
  • althon.wav – “altitude hold active”
  • althof.wav – “altitude hold off”
  • loiter.wav – “loiter”
  • sftyon.wav – “safety,on”
  • sftyof.wav – “safety,off”
  • safeon.wav – “SAFE,on”
  • safeof.wav – “SAFE,off”
  • fepact.wav – “flight envelope protection active”
  • fepoff.wav – “flight envelope protection off”
  • timrs1.wav – “timer 1 reset”
  • timrs2.wav – “timer 2 reset”
  • timrs3.wav – “timer 3 reset”
  • expo1.wav – “expo 1”
  • expo2.wav – “expo 2”
  • expo3.wav – “expo 3”
  • active.wav – “active”
  • deact.wav – “deactivated”
  • enabl.wav – “enabled”
  • disabl.wav – “disabled”
  • bad.wav – “bad”
  • warnng.wav – “warning”
  • ready.wav – “ready to fly”
  • homrst.wav – “home reset”
  • gps.wav – “GPS”
  • gpson.wav – “GPS,on”
  • gpsoff.wav – “GPS,off”
  • vtxfr1.wav – “VTX Frequency R1”
  • vtxfr2.wav – “VTX Frequency R2”
  • vtxfr3.wav – “VTX Frequency R3”
  • vtxfr4.wav – “VTX Frequency R4”
  • vtxfr5.wav – “VTX Frequency R5”
  • vtxfr6.wav – “VTX Frequency R6”
  • vtxfr7.wav – “VTX Frequency R7”
  • vtxfr8.wav – “VTX Frequency R8”
  • vtxmax.wav – “VTX Maximum Power”
  • blkers.wav – “blackbox erase”
  • actnmd.wav – “acro trainer mode”
  • cwifi.wav – “Camera wifi button”
  • cpower.wav – “Camera power button”
  • cmode.wav – “Camera change mode”
  • cstart.wav – “Camera start”
  • cstop.wav – “Camera stop”
  • recsrt.wav – “Recording start”
  • recstp.wav – “Recording stop”
  • strtrc.wav – “Start recording”
  • stoprc.wav – “Stop recording”
  • SYSTEM/dbm0.wav – “DBM”
  • SYSTEM/dbm1.wav – “DBM”
  • SYSTEM/km0.wav – “kilometer”
  • SYSTEM/km1.wav – “kilometers”
  • revthr.wav – “Reverse Thrust”
  • revon.wav – “Reverse Thrust On”
  • revoff.wav – “Reverse Thrust Off”
  • revid.wav – “Reverse Thrust Idle”
  • revfwd.wav – “Forward Thrust”
  • SYSTEM/telemco.wav – “telemetry connected”
  • lvlmod.wav – “level mode”
  • difloc.wav – “diffs locked”
  • difulc.wav – “diffs unlocked”
  • engsrt.wav – “engine start”
  • engstp.wav – “engine stop”
  • engon.wav – “engine on”
  • turnon.wav – “Turn signals on”
  • turnof.wav – “Turn signals off”
  • highgr.wav – “High gear”
  • lowgr.wav – “Low gear”
  • digmod.wav – “Dig mode”
  • 2wd.wav – “Two wheel drive”
  • 4wd.wav – “Four wheel drive”
  • wchin.wav – “Winch in”
  • wchout.wav – “Winch out”
  • str-f.wav – “Front Steer”
  • str-r.wav – “Rear Steer”
  • str-4w.wav – “Four Wheel Steer”
  • str-mr.wav – “Mirror Steer”
  • str-cr.wav – “Crab Steer”
  • therml.wav – “Thermal”
  • fwd.wav – “Front wheel drive”
  • rwd.wav – “Rear wheel drive”
  • awd.wav – “All wheel drive”
  • thren.wav – “Throttle enabled”
  • thrdis.wav – “Throttle disabled”
  • wchen.wav – “Winch enabled”
  • wchdis.wav – “Winch disabled”
  • drifon.wav – “Drift mode on”
  • drifof.wav – “Drift mode off”
  • gyroon.wav – “Gyro enabled”
  • gyroof.wav – “Gyro disabled”
  • launch.wav – “Launch control active”
  • wetmde.wav – “Wet mode enabled”
  • maxgyr.wav – “Max gyro”
  • maxast.wav – “Max assistance”
  • overht.wav – “Overheating”
  • mothot.wav – “Motor overheating”
  • drifen.wav – “Drift Mode Enabled”
  • drifdb.wav – “Drift Mode Disabled”
  • screns.wav – “Screenshot”
  • txbatl.wav – “Transmitter Battery Low”
  • left.wav – “Left”
  • right.wav – “Right”
  • shift.wav – “Shift”
  • sbcton.wav – “Stability Control On”
  • sbctof.wav – “Stability Control Off”
  • sbcten.wav – “Stability Control Enabled”
  • sbctdb.wav – “Stability Control Disabled”
  • thmwrn.wav – “Thermal Warning”
  • srvovl.wav – “Servo Overload”
  • becovl.wav – “Beck Overload”
  • sbct.wav – “Stability Control”
  • sbctst.wav – “Stability Control – Standard”
  • gyro.wav – “Gyro”
  • low.wav – “Low”
  • medium.wav – “Medium”
  • high.wav – “High”
  • stanrd.wav – “Standard”
  • bashmd.wav – “Bash Mode”
  • racemd.wav – “Race Mode”
  • chilmd.wav – “Chill Mode”
  • trnmd.wav – “Trainer Mode”
  • spdmd.wav – “Speed Mode”
  • citymd.wav – “City Mode”
  • crusmd.wav – “Cruise Mode”
  • flapmd.wav – “Flaps Middle”
  • flapfl.wav – “Flaps Full”
  • moton.wav – “Motor On”
  • motoff.wav – “Motor Off”
  • motidl.wav – “Motor Idle”
  • autor.wav – “Autorotation”
  • reson.wav – “Rescue On”
  • htemp.wav – “High Temperature”
  • hvibr.wav – “High Vibration”
  • glwon.wav – “Glow On”
  • glwoff.wav – “Glow Off”
  • glwact.wav – “Glow Activated”
  • glwdea.wav – “Glow Deactivated”
  • trkmd.wav – “Track Mode”
  • dbrk.wav – “Drag brake”
  • dbrkon.wav – “Drag brake on”
  • dbrkof.wav – “Drag brake off”
  • dbrklw.wav – “Drag brake Low”
  • dbrkmd.wav – “Drag brake Medium”
  • dbrkhi.wav – “Drag brake High”
  • snapfon.wav – “Snapflap On”
  • snapfof.wav – “Snapflap Off”
  • snapflo.wav – “Snapflap Low”
  • snapfhi.wav – “Snapflap High”
  • autotun.wav – “Auto tune”
  • alvltrim.wav – “Auto level trim”
  • srvatrim.wav – “Servo auto trim”
  • open.wav – “open”
  • close.wav – “close”
  • locked.wav – “locked”
  • unlckd.wav – “unlocked”
  • canopy.wav – “canopy”
  • bind.wav – “bind”
  • vgext.wav – “wings extending”
  • vgextd.wav – “wings extended”
  • vgfold.wav – “wings folding”
  • vgfldd.wav – “wings folded”
Optional script sounds included
0 of 179 optional script sounds included

Some optional script sounds are not included.

View missing script sounds
  • BETAFLIGHT/p.wav – “P”
  • BETAFLIGHT/i.wav – “I”
  • BETAFLIGHT/d.wav – “D”
  • BETAFLIGHT/dsetpt.wav – “D setpoint”
  • INAV/acromd.wav – “acro mode”
  • INAV/active.wav – “active”
  • INAV/althld.wav – “altitude hold”
  • INAV/anglmd.wav – “angle mode”
  • INAV/batcrt.wav – “battery critical”
  • INAV/batlow.wav – “Low battery”
  • INAV/battry.wav – “battery”
  • INAV/cruzmd.wav – “cruise mode”
  • INAV/danger.wav – “danger”
  • INAV/engarm.wav – “engines armed”
  • INAV/engdrm.wav – “engines disarmed”
  • INAV/fsoff.wav – “failsafe off”
  • INAV/fson.wav – “failsafe on”
  • INAV/good.wav – “good”
  • INAV/gps.wav – “GPS”
  • INAV/hedhlda.wav – “heading hold active”
  • INAV/hedhld.wav – “heading hold”
  • INAV/hfact.wav – “headfree active”
  • INAV/hfoff.wav – “headfree off”
  • INAV/homrst.wav – “home reset”
  • INAV/hrznmd.wav – “horizon mode”
  • INAV/lost.wav – “lost”
  • INAV/manmd.wav – “manual mode”
  • INAV/normal.wav – “normal”
  • INAV/off.wav – “off”
  • INAV/on.wav – “on”
  • INAV/poshld.wav – “position hold”
  • INAV/ready.wav – “ready to fly”
  • INAV/rtl.wav – “return to launch”
  • INAV/toohgh.wav – “too high”
  • INAV/warnng.wav – “warning”
  • INAV/waypt.wav – “waypoint”
  • YAAPU/acro.wav – “acro flight mode”
  • YAAPU/acro_r.wav – “Acro mode”
  • YAAPU/alt.wav – “Altitude”
  • YAAPU/althold.wav – “Altitude hold flight mode”
  • YAAPU/armed.wav – “Motors armed”
  • YAAPU/auto.wav – “Auto flight mode”
  • YAAPU/auto_r.wav – “Auto mode”
  • YAAPU/autortl.wav – “Auto RTL flight mode”
  • YAAPU/autotune.wav – “Autotune enabled”
  • YAAPU/avoidadsb.wav – “Avoid A D S B flight mode”
  • YAAPU/bat5.wav – “Battery at 5 percent”
  • YAAPU/bat10.wav – “Battery at 10 percent”
  • YAAPU/bat15.wav – “Battery at 15 percent”
  • YAAPU/bat20.wav – “Battery at 20 percent”
  • YAAPU/bat25.wav – “Battery at 25 percent”
  • YAAPU/bat30.wav – “Battery at 30 percent”
  • YAAPU/bat40.wav – “Battery at 40 percent”
  • YAAPU/bat50.wav – “Battery at 50 percent”
  • YAAPU/bat60.wav – “Battery at 60 percent”
  • YAAPU/bat70.wav – “Battery at 70 percent”
  • YAAPU/bat80.wav – “Battery at 80 percent”
  • YAAPU/bat90.wav – “Battery at 90 percent”
  • YAAPU/batalert.wav – “Battery alert”
  • YAAPU/batalert1.wav – “Battery level 1 alert”
  • YAAPU/batalert2.wav – “Battery level 2 alert”
  • YAAPU/brake.wav – “Brake flight mode”
  • YAAPU/circle.wav – “Circle flight mode”
  • YAAPU/cruise.wav – “Cruise flight mode”
  • YAAPU/disarmed.wav – “Motors disarmed”
  • YAAPU/dist.wav – “Distance”
  • YAAPU/drift.wav – “Drift flight mode”
  • YAAPU/ekf.wav – “E K F failsafe”
  • YAAPU/failsafe.wav – “failsafe”
  • YAAPU/fence.wav – “fence enabled”
  • YAAPU/fencebreach.wav – “fence breach”
  • YAAPU/flip.wav – “Flip flight mode”
  • YAAPU/flowhold.wav – “flow position hold flight mode”
  • YAAPU/flybywirea.wav – “Fly by wire – A – flight mode”
  • YAAPU/flybywireb.wav – “Fly by wire – B – flight mode”
  • YAAPU/follow.wav – “follow flight mode”
  • YAAPU/follow_r.wav – “follow mode”
  • YAAPU/gpsfix.wav – “GPS 3D fix lock”
  • YAAPU/gpsnofix.wav – “No gps”
  • YAAPU/guided.wav – “Guided flight mode”
  • YAAPU/guided_r.wav – “Guided mode”
  • YAAPU/guidednogps.wav – “Guided no gps flight mode”
  • YAAPU/hold_r.wav – “Hold mode”
  • YAAPU/initializing.wav – “Initializing”
  • YAAPU/initializing_r.wav – “Initializing”
  • YAAPU/land.wav – “Land flight mode”
  • YAAPU/landing.wav – “Landing complete”
  • YAAPU/loiter.wav – “Loiter flight mode”
  • YAAPU/loiter_r.wav – “Loiter mode”
  • YAAPU/lowbat.wav – “Low battery”
  • YAAPU/manual.wav – “Manual flight mode”
  • YAAPU/manual_r.wav – “Manual mode”
  • YAAPU/maxalt.wav – “Max altitude alert”
  • YAAPU/maxdist.wav – “Max distance alert”
  • YAAPU/minalt.wav – “Low altitude alert”
  • YAAPU/poshold.wav – “Position hold flight mode”
  • YAAPU/qacro.wav – “Q acro flight mode”
  • YAAPU/qautotune.wav – “Q autotune flight mode”
  • YAAPU/qhover.wav – “Q hover flight mode”
  • YAAPU/qland.wav – “Q land flight mode”
  • YAAPU/qloiter.wav – “Q loiter flight mode”
  • YAAPU/qrtl.wav – “Q return to home flight mode”
  • YAAPU/qstabilize.wav – “Q stabilize flight mode”
  • YAAPU/rtl.wav – “Return to home”
  • YAAPU/rtl_r.wav – “Return to home mode”
  • YAAPU/simple_r.wav – “simple mode”
  • YAAPU/simpleoff.wav – “simple mode disabled”
  • YAAPU/simpleon.wav – “simple mode enabled”
  • YAAPU/smartrtl.wav – “Smart return to home flight mode”
  • YAAPU/smartrtl_r.wav – “Smart return to home mode”
  • YAAPU/sport.wav – “Sport flight mode”
  • YAAPU/ssimpleoff.wav – “super simple mode disabled”
  • YAAPU/ssimpleon.wav – “super simple mode enabled”
  • YAAPU/stabilize.wav – “Stabilize flight mode”
  • YAAPU/steering_r.wav – “Steering mode”
  • YAAPU/terrainko.wav – “no terrain data”
  • YAAPU/thermal.wav – “Thermal flight mode”
  • YAAPU/throw.wav – “Throw flight mode”
  • YAAPU/timealert.wav – “Timer alert”
  • YAAPU/training.wav – “Training flight mode”
  • YAAPU/turtle.wav – “turtle mode”
  • YAAPU/zigzag.wav – “Zigzag flight mode”
  • YAAPU/takeofffm.wav – “takeoff flight mode”
  • YAAPU/systemid.wav – “System I D flight mode”
  • YAAPU/autorotate.wav – “autorotate flight mode”
  • YAAPU/velocity.wav – “velocity flight mode”
  • YAAPU/yaapu.wav – “Yaa-pu telemetry ready”
  • YAAPU/altctl.wav – “Altitude control mode”
  • YAAPU/posctl.wav – “Position control mode”
  • YAAPU/ready.wav – “ready”
  • YAAPU/takeoff.wav – “Auto takeoff mode”
  • YAAPU/mission.wav – “Auto mission mode”
  • YAAPU/rtgs.wav – “link loss failsafe mode”
  • YAAPU/precland.wav – “Precision landing mode”
  • YAAPU/offboard.wav – “Offboard mode”
  • YAAPU/rattitude.wav – “rate attitude mode”
  • YAAPU/simple.wav – “simple mode”
  • YAAPU/264977348.wav – “PreArming: Need 3D Fix”
  • YAAPU/1834616480.wav – “Smart RTL Unavailable”
  • YAAPU/2386213680.wav – “EKF variance”
  • YAAPU/2310179660.wav – “GPS Glitch cleared”
  • YAAPU/4137200300.wav – “GPS Glitch”
  • YAAPU/2664106240.wav – “Parachute: Released”
  • YAAPU/656739232.wav – “Flight plan received”
  • YAAPU/3708582640.wav – “Mission complete”
  • YAAPU/1809087708.wav – “Geofence triggered”
  • YAAPU/116655276.wav – “Flight mode change failed”
  • YAAPU/1008001424.wav – “AutoTune: Success”
  • YAAPU/1396289024.wav – “AutoTune: Failed”
  • YAAPU/986165592.wav – “Transition done”
  • YAAPU/1249672288.wav – “Transition started”
  • YAAPU/4019153925.wav – “Transition done”
  • YAAPU/3417557720.wav – “Transition VTOL done”
  • YAAPU/1204090832.wav – “Land descend started”
  • YAAPU/2890289840.wav – “Land final started”
  • YAAPU/1883944664.wav – “Soaring: Outside max radius”
  • YAAPU/4175833240.wav – “Soaring: Disabled.”
  • YAAPU/2599859119.wav – “Soaring: not climbing”
  • YAAPU/636067590.wav – “Soaring: drifted too far”
  • YAAPU/2730864352.wav – “Soaring: Too high”
  • YAAPU/1698465616.wav – “Soaring: Too low”
  • YAAPU/981284144.wav – “Soaring: Thermal ended”
  • YAAPU/2913564252.wav – “Soaring: Drifted too far”
  • YAAPU/1746499976.wav – “Soaring: Exit via RC switch”
  • YAAPU/883458048.wav – “Soaring: Enabled.”
  • YAAPU/2139150204.wav – “Soaring: thermal weak”
  • YAAPU/1352994600.wav – “Soaring: reached upper altitude”
  • YAAPU/4026147344.wav – “Soaring: reached lower altitude”
  • YAAPU/4091124880.wav – “reached command:”
  • YAAPU/3311875476.wav – “reached waypoint:”
  • YAAPU/1997782032.wav – “Passed waypoint:”
  • YAAPU/554623408.wav – “Takeoff complete”
  • YAAPU/3025044912.wav – “Smart RTL deactivated”
  • YAAPU/3956583920.wav – “GPS home acquired”
  • YAAPU/1309405592.wav – “GPS home acquired”
  • INAV/autotn.wav – “Auto Tune”
  • INAV/autolm.wav – “Auto Level Trim”
  • INAV/soarng.wav – “Soaring”
  • INAV/beeper.wav – “Beeper”
Additional/Unknown Files
170 additional audio files found in ZIP
View extra files
  • SOUNDS/en/landnow.wav
  • SOUNDS/en/lq-full.wav
  • SOUNDS/en/cf.wav
  • SOUNDS/en/wpreach.wav
  • SOUNDS/en/doagain.wav
  • SOUNDS/en/jbphone.wav
  • SOUNDS/en/telemko.wav
  • SOUNDS/en/mid.wav
  • SOUNDS/en/jb.wav
  • SOUNDS/en/beast.wav
  • SOUNDS/en/loitr.wav
  • SOUNDS/en/frstyle.wav
  • SOUNDS/en/pullup.wav
  • SOUNDS/en/hyforget.wav
  • SOUNDS/en/hardmode.wav
  • SOUNDS/en/soaring.wav
  • SOUNDS/en/txbatlw2.wav
  • SOUNDS/en/failsafe.wav
  • SOUNDS/en/Inactive.wav
  • SOUNDS/en/txbatlow.wav
  • SOUNDS/en/thx.wav
  • SOUNDS/en/inacalrm.wav
  • SOUNDS/en/crow-off.wav
  • SOUNDS/en/enabld.wav
  • SOUNDS/en/ovrhere2.wav
  • SOUNDS/en/lowrt.wav
  • SOUNDS/en/satel.wav
  • SOUNDS/en/toolow2.wav
  • SOUNDS/en/signalko.wav
  • SOUNDS/en/elapsed.wav
  • SOUNDS/en/batlow.wav
  • SOUNDS/en/cf-hgspd.wav
  • SOUNDS/en/imlonely.wav
  • SOUNDS/en/lrnsome.wav
  • SOUNDS/en/g.wav
  • SOUNDS/en/signalok.wav
  • SOUNDS/en/min.wav
  • SOUNDS/en/SYSTEM/telewoo.wav
  • SOUNDS/en/SYSTEM/rx_red.wav
  • SOUNDS/en/SYSTEM/satel0.wav
  • SOUNDS/en/SYSTEM/rx-org.wav
  • SOUNDS/en/SYSTEM/helloed.wav
  • SOUNDS/en/SYSTEM/rssiorg.wav
  • SOUNDS/en/SYSTEM/rssired.wav
  • SOUNDS/en/SYSTEM/timover1.wav
  • SOUNDS/en/SYSTEM/teleomg.wav
  • SOUNDS/en/SYSTEM/celcius1.wav
  • SOUNDS/en/SYSTEM/tadaopn.wav
  • SOUNDS/en/SYSTEM/timover3.wav
  • SOUNDS/en/SYSTEM/modelpw.wav
  • SOUNDS/en/SYSTEM/celcius0.wav
  • SOUNDS/en/SYSTEM/timover2.wav
  • SOUNDS/en/SYSTEM/satel1.wav
  • SOUNDS/en/acrmd.wav
  • SOUNDS/en/cinemode.wav
  • SOUNDS/en/idlup.wav
  • SOUNDS/en/varioon.wav
  • SOUNDS/en/midrats.wav
  • SOUNDS/en/alrghty.wav
  • SOUNDS/en/midrat.wav
  • SOUNDS/en/disabled.wav
  • SOUNDS/en/edgetx.wav
  • SOUNDS/en/acromd.wav
  • SOUNDS/en/wichhaha.wav
  • SOUNDS/en/mode.wav
  • SOUNDS/en/srvoverl.wav
  • SOUNDS/en/camon.wav
  • SOUNDS/en/crs.wav
  • SOUNDS/en/cf-red.wav
  • SOUNDS/en/actv.wav
  • SOUNDS/en/gpsaquir.wav
  • SOUNDS/en/swflpvid.wav
  • SOUNDS/en/badturtl.wav
  • SOUNDS/en/swfliped.wav
  • SOUNDS/en/turtle.wav
  • SOUNDS/en/trainrok.wav
  • SOUNDS/en/landmdon.wav
  • SOUNDS/en/trhupvid.wav
  • SOUNDS/en/txbatlw3.wav
  • SOUNDS/en/retrun.wav
  • SOUNDS/en/ezmode.wav
  • SOUNDS/en/kpgoing.wav
  • SOUNDS/en/ra-an-de.wav
  • SOUNDS/en/crow-on.wav
  • SOUNDS/en/takoff.wav
  • SOUNDS/en/cf-250mw.wav
  • SOUNDS/en/motdis.wav
  • SOUNDS/en/stblz.wav
  • SOUNDS/en/notgood.wav
  • SOUNDS/en/frdmunit.wav
  • SOUNDS/en/toolow.wav
  • SOUNDS/en/overhere.wav
  • SOUNDS/en/tmrexpir.wav
  • SOUNDS/en/lowrat.wav
  • SOUNDS/en/crsmode.wav
  • SOUNDS/en/buzzer.wav
  • SOUNDS/en/timres.wav
  • SOUNDS/en/antnnako.wav
  • SOUNDS/en/home.wav
  • SOUNDS/en/beeper.wav
  • SOUNDS/en/position.wav
  • SOUNDS/en/hirt.wav
  • SOUNDS/en/pwroverl.wav
  • SOUNDS/en/whatsave.wav
  • SOUNDS/en/gpsfix.wav
  • SOUNDS/en/percnt.wav
  • SOUNDS/en/makepack.wav
  • SOUNDS/en/toohigh2.wav
  • SOUNDS/en/max.wav
  • SOUNDS/en/quadgone.wav
  • SOUNDS/en/thrmdon.wav
  • SOUNDS/en/notgood2.wav
  • SOUNDS/en/started.wav
  • SOUNDS/en/race.wav
  • SOUNDS/en/beastmd.wav
  • SOUNDS/en/ohman.wav
  • SOUNDS/en/waypoint.wav
  • SOUNDS/en/cf-lost.wav
  • SOUNDS/en/armed2.wav
  • SOUNDS/en/cinewhp.wav
  • SOUNDS/en/telemok2.wav
  • SOUNDS/en/p.wav
  • SOUNDS/en/opentx.wav
  • SOUNDS/en/forgetme.wav
  • SOUNDS/en/lndgmd.wav
  • SOUNDS/en/trainrko.wav
  • SOUNDS/en/d-setpnt.wav
  • SOUNDS/en/manic-ha.wav
  • SOUNDS/en/rate.wav
  • SOUNDS/en/darmed.wav
  • SOUNDS/en/landng.wav
  • SOUNDS/en/cf-nrspd.wav
  • SOUNDS/en/telemok.wav
  • SOUNDS/en/69.wav
  • SOUNDS/en/I.wav
  • SOUNDS/en/fm-acro.wav
  • SOUNDS/en/mission.wav
  • SOUNDS/en/cf-lwspd.wav
  • SOUNDS/en/sprt.wav
  • SOUNDS/en/race2.wav
  • SOUNDS/en/battreco.wav
  • SOUNDS/en/task.wav
  • SOUNDS/en/hghspdmd.wav
  • SOUNDS/en/cf-100mw.wav
  • SOUNDS/en/space.wav
  • SOUNDS/en/getout.wav
  • SOUNDS/en/thermal.wav
  • SOUNDS/en/satels.wav
  • SOUNDS/en/negative.wav
  • SOUNDS/en/toohigh.wav
  • SOUNDS/en/d.wav
  • SOUNDS/en/reset.wav
  • SOUNDS/en/damnyou.wav
  • SOUNDS/en/learning.wav
  • SOUNDS/en/hirat.wav
  • SOUNDS/en/quadison.wav
  • SOUNDS/en/jbintro.wav
  • SOUNDS/en/cf-25mw.wav
  • SOUNDS/en/camoff.wav
  • SOUNDS/en/land.wav
  • SOUNDS/en/thrup.wav
  • SOUNDS/en/thousand.wav
  • SOUNDS/en/stoppd.wav
  • SOUNDS/en/telemko2.wav
  • SOUNDS/en/sonbitch.wav
  • SOUNDS/en/reached.wav
  • SOUNDS/en/training.wav
  • SOUNDS/en/cf-org.wav
  • SOUNDS/en/juicy.wav
  • SOUNDS/en/variooff.wav

Related products